Skip to main content

Risk management

ICH Q9 (R1)

Adopted on 18-Jan-2023

Quality Risk Management is valuable component of effective quality system.

Two primary principles of quality risk management are-

1. Risk to quality shall be based on scientific knowledge and ultimately link to protection of the patients 
2. Level of efforts, formality and documentation of the quality risk management process should be commensurate with the level of risks
Labels:

Comments

Post a Comment

Popular posts from this blog

NVPC

NVPC Online NVPC: Make= Beckman; Model= Met one 6015P; Capacity= 1CFM SOFTWARE= EnVigil Critical alarm: Critical alarms are those alarms when generated indicate excursion which may impact the product quality. Alarm generated in location where the NVPC probe is in close proximity to the product/ sterile container closure/ product contact path. Location for critical alarms includes grade A location - Filling station, Bunging station, Bunging Hopper station, Portable cart, IOS station, AGV station, Near lyophilizer door open, between lyophilizers (near Lyo) and Lyo LAF (rigid barrier transfer conveyor). Critical alarms include the following- 1.     Particle count excursion beyond the acceptance criteria at a particular location. 2.     Sensor Failure, Counter Flow Failure, ERROR or SKIPPED message. Ensure and verify the status of counter flow to meet the below set limit- Target Counter flow – 1.0 CFM. Minimum counter flow: ...
Post a Comment
Read more

Air velocity measurement and correlation to smoke study

Air velocity measurement As part of risk assessment this evaluation should also consider the selection of locations for the critical control points for monitoring air velocity as well as viable and non-viable particles. 1. Problem Statement- Where should airflow velocity measurements be taken with respect to a filling line or other aseptic processing areas? Recommendation Airflow velocity measurements should be taken at locations where meaningful and reproducible results can be obtained. This is typically at a distance of 6 inches from the filter face . Rationale for Recommendation The primary reason for airflow velocity measurements in unidirectional airflow areas (e.g., areas where product, product contact packaging components, and product contact surfaces are exposed) is to assure there is adequate airflow to protect the materials from external airborne contamination . Accurate measurements can be taken and changes over time detected when airflow velocities are e...
Post a Comment
Read more

Audit and compliance

Audit readiness Reference https://www.fdanews.com/ext/resources/files/The_Food_And_Drug_Letter/2013/Inspection-Readiness-ExecSeries.pdf https://ispe.org/initiatives/regulatory-resources/gmp/audit-checklist# Before start of audit we need to review past audits and note indication of possible problem areas and items, if any ensure that were identified for corrective actions in a previous audit. If not aware about facility learn what products being produced and how it is organised with personal and function. To have systematic audit checklist to be prepared and alongwith notebook it needs to be utilised (notebook required to make detailed entries while audit and checklist is to guide auditor). Atleast three production batches to be selected For thorough analysis to include- a) Traceability of all components or materials used in that batch. b) Documentations of raw materials or components, inprocess and finished goods testing for subject product batches. c) Warehousing and distribution reco...
Post a Comment
Read more